fol0906a / 980nm high power stabilized ldm date mar.4 2005 odc-5h001 980nm high power stabilized ldm, 300mw applications ? pump source for er-doped fiber amplifier c- band edfa ? single channel amp to dwdm amp description ? the fol0906a series has been designed for use in a wide variety of optical amplifier, such as edfa used in optical transmission systems, especially in dense wavelength-division- multiplexing (dwdm) systems. ? a strained quantum well laser diode chip is integrated with thermo-electric cooler (tec), thermistor and pin photodiode in a hermetically sealed 14 pin butterfly package. ? a lensed-fiber system enables high coupling efficiency and the output power up to 300 mw . ? this laser module complies with telecom requirements described in telcordia tm gr-468 requirement and manufactured in an iso tm 9001 certified production line. features ? rated output power up to 300 mw (operating) ? widely deployed reliable package design with industry compatible 14 pin butterfly footprint ? internal thermo-electric cooler (tec) and thermistor for stable operation ? integrated pin photodiode ? wavelength stabilization with external fbg ? pmf pigtail is available. ? epoxy free design inside the module for long term reliability
fol0906a / 980nm high power stabilized ldm 300mw odc-5h001 date mar.4. 2005 2 absolute maximum ratings optical and electrical specifications ( sensor temperature (ts) = 25c) parameters sym. min. max. unit parameters sym. min. max. unit storage temperature tstg -40 85 c pd forward current ifpd - 5 ma operating case temperature tc -5 75 c pd reverse voltage vrpd - 20 v fiber output power pf - 500 mw tec current ic -0.6 2 a ld forward current if - 1000 ma tec voltage vc - 4.5 v ld reverse voltage vr - 2.5 v parameters sym. min. typ. max. unit conditions output power fol0906a23 230 - - ifbol=<560ma fol0906a24 240 - - ifbol=<560ma fol0906a25 250 - - ifbol=<580ma fol0906a26 260 - - ifbol=<600ma fol0906a27 270 - - ifbol=<620ma fol0906a28 280 - - ifbol=<620ma fol0906a29 290 - - ifbol=<650ma fol0906a30 pf 300 - - mw ifbol=<650ma threshold current ith - 70 85 ma cw center wavelength c c-1 c c+1 nm peak, rated power c=974~976nm spectral width ? - - 2 nm fwhm, rated power wavelength stability (temp) ? / ? t - 0.01 0.02 nm/c t: fbg temp. ld forward voltage vf - - 2.5 v rated power ld forward current at eol ifeol - - 1.1xifbol ma end of life kink free power pkink 1.1xpf - - mw - optical power stability ? pf - - 2.0 % 30mw~pf , 60s peak to peak monitor responsivity im/pf 2 - 20 a/mw vrpd=5v, average 0mw ~ pf monitor dark current id - - 100 na vrpd=5v tec current ic - - 1.4 a max. ? t=50c, ifeol tec voltage vc - - 3.2 v max. ? t=50c, ifeol thermistor resistance rth 9.5 10 10.5 k ? ts=25c thermistor b constant rth - 3900 - k ts=25c tracking error t.e. -0.5 - 0.5 db tc=-5~75c referred to tc=25c
fol0906a / 980nm high power stabilized ldm 300mw odc-5h001 date mar.4. 2005 3 dimensions & pin assignment dimensions pin assi g nment type d, j type h fiber length fbg 15. 24 6-2.54 2.8 20 +/- 0.5 4- 2.7 14-0.5 fu s io n s plice > 500 20.8 26 .0 +/- 0 .15 30.0 +/- 0.2 0.2 (5 .3) 1.5 7.6 0 . 2 (15. 2 ) 1 2 . 7 + / - 0 . 1 5 8 . 9 + / - 0 . 1 5 5 . 0 1 0 . 0 m i n (4.9) (400) (r eco ate d) ( recoate d) 25 (400) type d : smf 0.25 t y p ej :pmf 0.25 type d : smf 0.25 ty p e j : p m f 0.25 typ e d : type j : 30 0 > fiber length fbg 15. 24 6-2.54 2.8 20 +/- 0.5 4- 2.7 14-0.5 fusion splice >500 20.8 26.0 +/- 0.15 30.0 +/- 0.2 0.2 (5 .3) 1.5 7.6 0 . 2 (15. 2 ) 1 2 . 7 + / - 0 . 1 5 8 . 9 + / - 0 . 1 5 5 . 0 1 0 . 0 m i n (4.9) (400) (r ecoated) ( reco ated) 25 (400) pmf 0.25 fusion splice ( re coa t ed ) pmf 0.2 5 smf 0.2 5 (3 0 0)
fol0906a / 980nm high power stabilized ldm 300mw odc-5h001 date mar.4. 2005 4 ordering information fol 0906 a - - xxx fbg wavelength output power e.g. 250mw 25 300mw 30 h : pmf pigtail w/fbg e.g. 975nm 975 xx x 1 7 fiber coating 1 : 0.25 uv coating pin assignment 7 : standard (interface is puremode tm hi1060) j : pmf pigtail w/fbg (interface is pmf) pigtail type d : smf pigtail w/fbg (puremode tm hi1060) safety information this product complies with 21 cfr 1040.10 and 1040.11, class 3b laser product. invisible laser radiation is emitted from the end of the fiber or connector. avoid direct exposure to the beam. iso is a trademark of the international organization for standardization. telcordia is a trademark of telcordia technologies, inc. puremode is a trademark of corning, inc. furukawa electric co, ltd., furukawa america, inc, and furukawa electric europe, ltd. reserve the right to change data contained in this document in the interest of continued product improvement. the publication of this information does not impl y freedom from patent or any other rights of the furukawa electric company, ltd. or its affiliated companies. all rights reserved, copyright ? the furukawa electric co., ltd. furukawa electric co, ltd headquarters 2-3 marunouchi 2-chome chiyoda-ku tokyo 100-8322 japan t: 81-3-3286-3253 f: 81-3-3286-3515 www.furukawa.co.jp furukawa electric europe, ltd 3 rd fl newcombe house 43-45 notting hill gate london, uk t: 44-20-7221-6000 f: 44-20-7313-5310 www.furukawa-fitel.co.uk sales@furukawa-fitel.co.uk furukawa america, inc. 200 westpark drive,suite 190 peachtree city, ga 30269 t:770-487-1234 toll-free:1-866-go-fitel(463-4835) f:770-487-9910 www.furukawaamerica.com oesales@furukawaamerica.com
|
